Performance indicators

Construction method

• Before the construction of fireproof coatings, the surface of the cable should be cleaned and polished of floating dust, oil, sundries, etc., and the construction of fireproof coatings can be carried out only after the surface is dry.
• The construction of this product adopts spraying, brushing and other methods, the use of which should be fully stirred, and when the coating is a little thick, it can be diluted with appropriate amount of tap water to facilitate spraying.
• During the construction process and before the coating is not dry, it should be waterproof, anti-exposure, anti-pollution, anti-movement, anti-bending, and if it is damaged, it should be repaired in time.
• For plastic, rubber jacket wires and cables, directly paint for more than 5 times generally. The coating thickness is 0.5-1mm and the approximate dosage is 15Kg/m². For an insulated cable with oiled paper outside, it should be wrapped with a layer of glass cloth, and then painted. If the construction is carried out in the outdoor or humid environment, it should be added with matching cover varnish.

Notes

• The product should be stored in a cool, dry and ventilated environment.
• When transporting the product, it should be prevented from sun, rain and damage, dumping and overflowing of the packaging drum.
• The effective storage period of this product is one year.